Canterbury Combi Slatted Fence Panels

Canterbury Combi Slatted Fence Panels 

About the panel

Canterbury Combi fence panels combine the style of two of Jacksons’ most popular fence panels: Tongue and Groove and our ever-popular Venetian are integrated to create on elegant fence panel. This panel provides the sleek contemporary feel of Venetian, while adding the benefit of extra privacy with the solid Tongue and Groove Effect lower two thirds of the panel.

Panel Specification

Our Canterbury Combi fence panels are made using our trademark vacuum pressure treated Jakcure® softwood timber and are guaranteed for 25 years. Constructed using stainless steel fixings, our fence panels are built to last.

The panel is given additional support with two 70mm wide cant rails that have an angled top to allow rain to drain away. 

The Venetian portion of the panel has 4 horizontal timber slats, the slates are planed giving a smooth finish. Please note pale spacing is different compared to our standard Venetian fence panels. 

• Lower section is 1515mm high, made from premium Tongue and Groove boards
• Upper section is 315mm high horizontal Venetian pales + additional capping rail
  

Please Note: dimensions may increase by 6% when first delivered as our treatment process can temporarily cause the product to swell.

Fence Post Options – Standard Slotted Jakpost® ,Heavy Duty Slotted Jakposts® 

​Gravel board options-  Standard Gravel Board , Hedgehog Friendly Gravel Board 

To meet the conditions of the 25 year guarantee, gravel boards are required where panels are in contact with the ground.

​Installation Advice Installation Instructions 

Reducing the width of the fence panel –  All fence panel are 1.83m wide as standard, if you require a narrower fence panel, you can cut the fence panel down on site using our cut down kit. Please remember to treat any cut ends with Jakcure Cut Treatment, to ensure you adhere to our 25-year guarantee guidelines.

Recommended Fixings

We recommend using 6 screws per panel or 12 per panel if using capping rails plus an additional 4 per gravel board. 60mm, stainless steel, self-drilling countersunk screws are available in packs of 100 or 200 to secure panels to posts. Panels should be screwed to the posts to secure the fence run.

If you require a non standard width panel e.g. to complete your fence run you would need 5 ½ panels, add a cut down kit to your basket in order to be able to cut the panel to the required size. Alternatively, please give us a call to speak to us about ordering a bespoke panel.

We recommend using our slotted Jakposts for intermediates, ends and corners, click on the button below to see the range

Slotted Posts

Gravel boards need to be used when panels are in contact with the ground as part of the 25 year Jakcure® guarantee. More details can be found on our Jakcure T&Cs page.

Gravel Boards

Capping Rails can be used on these panels. Use the button below to see intermediate, end and corner post capping rails

Capping Rails

Post Caps add the finishing touch to any fence, view the full range by clicking the button below

Post Caps

View our other types of similar fencing using the buttons below

Horizontal Tongue and Groove Fence Panels

Venetian Fence Panels

All Fence Panels

Please Note that the dimensions of components may increase by 6% when first delivered as our treatment process can temporarily cause the product to swell.

Document Downloads

• Panel fence instructions
• How to reduce the width of Jacksons Fencing Panels
• Q40 - Canterbury Combi Panel
• Canterbury Combi Spec Sheet
• Canterbury Combi 1830mm - J701313