Our other sites:
Gate Builder
Timber, Field & Entrance Gate Calculator
What style of gate would you like?
Our Gate Builder gives a choice of two gates to choose from;
- Uni-Gates, commonly used in the drive or field
- Traditional Entrance Gates with their traditional attractive design
Entrance gate
Looking for automated gates? Click here.
Do you already have posts in place?
Enter the widths of your posts
We do not recommend hanging gates on posts less than 150mm wide. If you require a gate wider than 1.5m, your posts should not be any less than 175mm wide.
If you are planning on hanging the gate on brick piers, please contact our sales department on 0800 408 2234
Please enter the total width of your gap in mm including posts (please note, 1m = 1000mm):
Please select a gate configuration for your opening
Please note that not all options shown are an exact match but allow for a number of flexible choices.
We show these for your convenience as it is sometimes possible to cut back a hedge to expand an opening or add some timber or brickwork to reduce an existing opening.
Single gate gate hung behind posts
There were no exact matches for a single gate hung behind the posts.
Below are the closest fits, these will require increasing or decreasing the opening respectively:
Single gate gate hung between posts
There were no exact matches for a single gate hung between the posts.
Below are the closest fits, these will require increasing or decreasing the opening respectively:
Pair gate gate hung behind posts
There were no exact matches for pair gates hung behind the posts.
Below are the closest fits, these will require increasing or decreasing the opening respectively:
Pair gate gate hung between posts
There were no exact matches for pair gates hung between the posts.
Below are the closest fits, these will require increasing or decreasing the opening respectively:
Note: We do not recommend hanging pairs of gates between posts
Select a fitting package
Recommended extras
You have selected the following gate configuration: X.XXm (including posts)
Gate Type, Pair/Single, x.xm
| Gate type: | Uni Gate(Change) |
| Post width left: | 105mm(Change) |
| Post width right: | 105mm (Change) |
| Hanging: | Behind (Change) |
| Single/Double: | Double (Change) |
| Width: | 2.3m (Change) |
£XXX.XX |
|||
Fittings: |
Standard(Change) |
£XXX.XX |
|
Extras: |
£XXX.XX |
||
Discount: |
£XXX.XX |
||
Total ex. VAT |
£XXX.XX |
If ordering gates to be hung as an unequal pair, please state in the “Special Instructions” box at checkout which gate will be hung on the Left and which gate will be hung on the Right, when viewed from outside of your property from the pavement/road.
Need help, call 0800 408 2234
Or chat to an assistant online Add to basketGate Builder Tool
Timber, Field & Entrance Gate Calculator
What style of gate would you like?
Our Gate Builder gives a choice of two gates to choose from;
- Uni-Gates, commonly used in the drive or field
- Traditional Entrance Gates with their traditional attractive design
Entrance gate
Looking for automated gates? Click here.
Do you already have posts in place?
Enter the widths of your posts
Warning:
We do not recommend hanging gates on posts less than 150mm wide. If you require a gate wider than 1.5m, your posts should not be any less than 175mm wide.
Note:
If you are planning on hanging the gate on brick piers, please contact our sales department on 0800 408 2234
Please enter the total width of your gap in mm including posts (please note, 1m = 1000mm):
Please select a gate configuration for your opening
Please note that not all options shown are an exact match but allow for a number of flexible choices.
We show these for your convenience as it is sometimes possible to cut back a hedge to expand an opening or add some timber or brickwork to reduce an existing opening.
Single gate gate hung behind posts
There were no exact matches for a single gate hung behind the posts.
Below are the closest fits, these will require increasing or decreasing the opening respectively:
Single gate gate hung between posts
There were no exact matches for a single gate hung between the posts.
Below are the closest fits, these will require increasing or decreasing the opening respectively:
Pair gate gate hung behind posts
There were no exact matches for pair gates hung behind the posts.
Below are the closest fits, these will require increasing or decreasing the opening respectively:
Pair gate gate hung between posts
There were no exact matches for pair gates hung between the posts.
Below are the closest fits, these will require increasing or decreasing the opening respectively:
Note: We do not recommend hanging pairs of gates between posts
Select a fitting package
Recommended extras
You have selected the following gate configuration: X.XXm (including posts)
Gate Type, Pair/Single, x.xm
| Gate type: | Uni Gate(Change) |
| Post width left: | 105mm(Change) |
| Post width right: | 105mm (Change) |
| Hanging: | Behind (Change) |
| Single/Double: | Double (Change) |
| Width: | 2.3m (Change) |
�XXX.XX |
|
Fittings: Standard(Change) �XXX.XX |
|
Extras: �XXX.XX |
|
Discount: �XXX.XX |
|
Total ex. VAT �XXX.XX |
If ordering gates to be hung as an unequal pair, please state in the �Special Instructions� box at checkout which gate will be hung on the Left and which gate will be hung on the Right, when viewed from outside of your property from the pavement/road.
Need help, call 0800 408 2234
Or chat to an assistant online Add to basketPlease be aware: Due to the natural variability of materials used in the manufacture of timber field and entrance gates, the gates are prone to some movement such as bows and twists in the timber components as they weather. This is natural and should not be considered as a defect, having no impact on the durability of the gate itself. When correctly fitted, the adjustable hinge sets, catches, centre gate stop and drop bolts are all intended to help keep the gates clear of the ground and in line also allowing for adjustment if gates do move.
Hanging gates ‘between’ posts is therefore not recommended as this prevents the gate hinges being adjusted for such natural movement. We understand that sometimes gates have to be installed between posts due to restrictions at the install location, or the alignment of the gate is treated as less critical and a compromise with its function etc. and for this reason we have continued to include the option of installing gates between posts in this builder.
Top