Woven Fence Panels

Woven Fence Panels

About the panel

As seen on ITV’s Love Your Garden, our Woven fence panels are designed with traditional interwoven pales. Woven is a modern take on a traditional fence style, with thick timber pales the fence panel is semi-solid allowing some light and air to pass through. Due to its design the panel creates beautiful, dappled light and shade effect when the sunlight shines through.

Woven fence panels are double sided, meaning they have no rails on either side so both you and your neighbour get the good side of the fence. The panel has less wind resistance due to its design, but this does mean you can see through the panel as some angles.

Panel Specification

Our Woven fence panels are made using our trademark vacuum pressure treated Jakcure® softwood timber and are guaranteed for 25 years. Constructed using stainless steel fixings, our fence panels are built to last

• Panels are 1.83m wide
• Panel thickness is 51mm
• Timber pales are 38mm high and 9mm depth
• As a semi-solid fence panel, at some angles you will be able to see through the panel

Please Note: dimensions may increase by 6% when first delivered as our treatment process can temporarily cause the product to swell.

Fence Post Options – Standard Slotted Jakpost® ,Heavy Duty Slotted Jakposts®  Mi-T®  Metal Garden Fence Post​​

​Gravel board options-  Standard Gravel Board , Hedgehog Friendly Gravel Board 

To meet the conditions of the 25 year guarantee, gravel boards are required where panels are in contact with the ground.

​Installation Advice Installation Instructions 

Reducing the width of the fence panel –  All fence panel are 1.83m wide as standard, if you require a narrower fence panel, you can cut the fence panel down on site using our cut down kit. Please remember to treat any cut ends with Jakcure Cut Treatment, to ensure you adhere to our 25-year guarantee guidelines.

Recommended Fixings

We recommend using 6 screws per panel or 12 per panel if using capping rails plus an additional 4 per gravel board. 60mm, stainless steel, self-drilling countersunk screws are available in packs of 100 or 200 to secure panels to posts. Panels should be screwed to the posts to secure the fence run.

If you require a non standard width panel e.g. to complete your fence run you would need 5 ½ panels, add a cut down kit to your basket in order to be able to cut the panel to the required size. Alternatively, please give us a call to speak to us about ordering a bespoke panel.

We recommend using our slotted Jakposts for intermediates, ends and corners, click on the button below to see the range

Slotted Posts

Gravel boards need to be used when panels are in contact with the ground as part of the 25 year Jakcure® guarantee. More details can be found on our Jakcure T&Cs page.

Gravel Boards

Capping Rails can be used on these panels. Use the button below to see our options

Capping Rails

Post Caps add the finishing touch to any fence, view the full range by clicking the button below

Post Caps

View our other woven style fencing using the buttons below

Aran Woven Style

Woven Range

All Fence Panels

Please Note that the dimensions of components may increase by 6% when first delivered as our treatment process can temporarily cause the product to swell.

Document Downloads

• Panel fence instructions
• How to reduce the width of Jacksons Fencing Panels
• Woven Panel Spec Sheet
• Q40 - Woven Panel
• Woven 1830mm - J701196
• Woven Gate Double Leaf - J702209sht2
• Woven Gate Single Leaf - J702209sht1