Our other sites:
Wooden Field Gates
Universal Timber Field or Driveway Gate
- Our Uni-Gates are called this as they are 'universal' which means they can be hung as right or left handed
- Gate is designed with heavy top rail over entire width for extra strength
- Both hanging and slam stiles are drilled to allow gates to be hung on the left or right
- New planed finish
- Rail and brace crossings are bolted with stainless steel bolts
- Top bars are chamfered
- Cross braced for extra strength
- All joints are morticed and tenoned
- Commonly used as driveway gates or field gates.
- These gates can be automated - please call
WAS
EXC VAT
INC VAT
NOW
EXC VAT
INC VAT
Please call for availability before ordering
Due to our stringent quality requirements and unwillingness to compromise on timber specification, we are currently having some challenges maintaining continuous supply of timber for our uni gates.
Please Note: Due to our stringent quality requirements, we are currently having some challenges maintaining continuous supply of timber for our 2.4m and 3.6m wide Uni Gates. Please call for availability.
Specification
- 0.9 - 4.2m wide
- Gates are 1.27m high overall. Top rail 100mm x 75mm, under rail and cross braces 75 x 25mm
- Hanging and slam stiles (rounded top) 100 x 75mm. With both stiles drilled to allow gates to be hung on the left or the right
- Supplied in natural Jakcured finish
Note: Narrow Uni-Gates (under 2.1m wide) when hung in a pair - Left handed bracing when viewed from front, opposite hanging is available at no extra cost. If you require a matching symmetrical braced pair, please make a note in the special instructions at checkout.
Don't forget to order hanging systems
Our standard sets are shown in the table below, but please also see our separate posts and gate fitting as well as our other gate fitting sets for a list of available options.
Note - the sets shown include posts that are fine sawn finish.
Fitting of irons to gates are included, for a pair of gates please state which gate should have loopover catch and drop bolt fitted as "special instructions" on checkout page.
TRHSDL= Uni Field Gate/Entrance Double Leaf
TRHSSL= Uni Field Gate/Entrance Single Leaf (Wide) 1.8m to 3.6m
TRHSSLN = Uni Field Gate/Entrance Single Leaf (Narrow) 0.9m to 1.5m
If you have requested your gate to be fitted we will fit as Right Hand Hung (when viewed from outside of the property) as standard.
When installing on a hill or incline, longer posts may be required allowing gate to have additional ground clearance and avoid grounding. This may also effect the option of a centre gate stop.
Please state in the special Instructions box at checkout any special request.
The hanging system codes are shown at the end of the product list on this page.
Description | Code | TRHSDL | TRHSSL | TRHSSLN |
AntiLift device | 271200BM | 2 | 1 | 1 |
Loop over catch | 271410 | 1 | ||
Fitting irons to gate | 271700 | 2 | 1 | 1 |
Hinge set | 271800 | 2 | 1 | 1 |
Spring catch set | 271300 | 1 | 1 | |
Gate post 2.1m 175x175 | 272400 | 2 | 1 | |
Gate post 2.1m 150x150 | 274000 | 1 | 2 | |
Heavy drop bolt | 351400 | 1 | ||
Drop bolt receiver | 351440 | 1 | ||
Centre gate stop | 927110 | 1 |
Click below for Field Gate installation instructions
Note: If you are thinking of automating a gate on this page either now or in the future, please discuss with us prior to purchase. Some types of gate automation require the gate to be built in a different way to our standard gates.
Remember to order your gates fittings and accessories. Explore our Gate Fitting Kits below
Please note that a centre gate stops, drop bolts and catchs/atches are essential for our gates, as they support the gates in their closed position and resist twists which can occur in the gates.View our gate post product page below. More information can be found at the bottom of this section.
Uni Gates are often used for driveways, but if you are looking for a more attractive gate with stile and crook, you may be interested in our Traditional Entrance Gates:
Please be aware: Due to the natural variability of materials used in the manufacture of timber field and entrance gates, the gates are prone to some movement such as bows and twists in the timber components as they weather. This is natural and should not be considered as a defect, having no impact on the durability of the gate itself. When correctly fitted, the adjustable hinge sets, catches, centre gate stop and drop bolts are all intended to help keep the gates clear of the ground and in line also allowing for adjustment if gates do move. Hanging gates ‘between’ posts is therefore not recommended as this prevents the gate hinges being adjusted for such natural movement. We understand that sometimes gates have to be installed between posts, some examples may include kissing gates and gates with ‘two-way’ latches where the gate has to be hung between posts. In these situations alignment of the gate has to be treated as less critical and a compromise with its function. Please feel free to call us for advice.
Document Downloads
- Timber Field and Entrance Gate Installation Instructions
- Q40 Uni-Gates.pdf
- 7 Bar Timber Uni-Field Gate NARROW 1800mm High x 900mm - 2000mm Wide - J702154sht4a
- 7 Bar Timber Uni-Field Gate WIDE 1800mm High x 2100m - 4200mm Wide - J702154sht4
- Narrow Timber Uni-field Gate 900mm - 1050mm Wide 4 BAR - J702154sht3a
- Narrow Timber Uni-field Gate 900mm - 1050mm Wide - J702154sht3
- Narrow Timber Uni-Field Gate 1100m - 2100m Wide 4 BAR - J702154sht2a
- Narrow Timber Uni-Field Gate 1100m - 2100m Wide - J702154sht2
- Narrow Timber Uni-field Gate 900mm- 1050mm Wide - Heavy Bottom Rail - J702154sht3x
- Wide Timber Uni-Field Gate 2150m - 4200m Wide - J702154sht1
- Wide Timber Uni-Field Gate 2150m - 4200m Wide 4 BAR - J702154sht1a
Approved Installers Network
Our network of Approved Installers are high skilled, carefully selected, reputable fence installers who we trust to install our high quality timber products to the highest installation standards. If you are interested in installation by one of our Approved Installers please click "Add installation to basket" below. We will be in touch shortly after processing your order to discuss installation.
Products in Wooden Field Gates
Just update the quantities of each item you wish to buy and click 'Add all to basket'
Just update the quantities of each item you wish to buy and click 'Add all to basket'
Related Products
Find related products for your order. If you cannot find the item you are looking for, please do not hesitate to call our friendly sales team.
Shopping with us
We offer the longest guarantee in the industry for manufactured timber products.
Established since 1947, we're experts in premium quality fencing
Find out more
Find out more about our market leading 25 year guarantees for service and timber treatment
Read more
Use our online tools to plan and price your Fencing, Gate or Decking project.
Get StartedFeatherboard Fence Calculator
Enter the run length and height, to calculate the items required:
You will need bays consisting of posts, pales, rails and Gravelboard(s).
Top