Our other sites:
Fence Calculator
Step 1: select your panel style and height
-
Flat
-
Convex
-
Concave
-
Trellis
-
Contemporary
-
Rural
-
Traditional
-
Privacy
-
Good both sides
Horizontal Hit And Miss
Horizontal Hit And Miss
- 1.06m
- 1.37m
- 1.67m
- 1.98m
Set Fence Height Height includes Gravel Board
Include Gravel board(s) - sits between panel and ground
Gravel boards need to be used when panels are in contact with the ground as part of the 25 year Jackure guarantee conditions. Also adds 150mm to the fence height.
You must have gravel boards if you have selected Heavy Duty posts on a fence panel that is 1.65m
Number of Panels
Please note, all panels are 1.83m wide and all slotted posts are standard 100x100mm.
Not sure how many panels you need?
Try our fence panel calculator
Step 2: Choose your posts
Step 2: Choose your style
Regular Posts HD
Corner Posts HD
End Posts HD
Regular standard posts Please note, all panels are 1.83m wide and all slotted posts are standard 100x100mm. Heavy Duty Jakposts are 120mm x 124mm nominal section, planed finish with two 54mm x 25mm slots for fence panels
Step 2: Choose your style
Regular or Corner Posts
End Posts
The same posts are used for a inter, corner or end but we will add a timber infill piece to your basket for each end post selected.
Step 3: Choose your cap style
Step 3: Choose your finish
Step 4: Add Extras
Post Fixing Mix
Post Fixing Mix should be used to set your posts into the ground. Our recommendations are that you should use 2x 20kg bags for posts being installed into hard ground or 3x 20kg bags for posts in soft ground, installing a fence taller than 1.8m or you are using our Heavy Duty posts.
3 bags per post will be required when using Heavy Duty posts.
Jakcure Cut Treatment
Jakcure Cut Treatment should be used when products are sawn or cut to ensure additional protection for any cut edge from potential rot and insect attack. This is required when cutting to qualify for our 25 year guarantee.
Capping Rail
A capping rail is installed on top of your fence panels and adds a great finishing touch.
Cut Down Kit
If you require a shorter panel than our standard width 1.83m add a cut down kit to your order so that you can reduce the width of the panel on site.
Hedgehog Gravel Board
To help the UK's declining hedgehog population we recommend you replace some of your gravel boards with our Hedgehog Friendly Gravel Boards. Doing this allows hedgehogs to roam freely between gardens to search for food and mates.
Screws
We recommend 6 screws per panel or 12 if using a capping rail. Approx. 100 screws per pack
Infill Pieces
For gardens where you are required to step fence panels in order to follow sloping ground, we recommend adding an infill piece to slot into your posts in order to fill the gap between the fence panel and the top of the post. Infill pieces are 2m long and can be cut to size on site.
Security Comb
To add extra security to your fence add a Security Comb to your order. Please note: you may require planning permission or building regulations approval to install this security measure. It is essential that you install warning signs when in use. (code 329330).
Step 5: Confirm your order
Product Package Sub-total:
Basket Total:
Please don't use your 'Back' button
Using the 'back' button on your device or web browser could lose your progress. Please use the navigation provided above.
Loading...
Fence builder app
Top